A rainwater collection system does exactly what it says ... collect rain water sounds. In Australia, the dry climate, use of rainwater harvesting is a practical solution to a difficult problem was. You need to drink water for many reasons more. You need water to do laundry, toilet flushing, garden watering and covering a variety of outdoor cleaning. In fact, in South Australia are up to 30% of homes have a rainwater harvesting andOutback, have allowed people to obtain adequate supply of water despite the dry conditions.
The materials in a rainwater collection system used to be quite easy, because the system itself is efficient and easy to install. You can choose two different settings, and those who wanted to select the type of material required.
With the gravity and the laws of nature
An exhaust system for collecting rain water is where you just let nature take its course. IfRain, gravity pushes the water pumped into the tank, where, he was at the farm and garden or inside the house.
A focusing system does not need a pump to get water into the water tank. The raw materials for the system of gravity requires the following.
* Gutters to collect rainwater
* Leaf collection runs the dirt trap and drainpipe
* PVC pipe that directs water into the tub and out for the amount of waterTank
* In the first pass at the first rain the amount of waste
* Rain water filter to remove dirt
* Base of sand or a more permanent tank
* Rain water tank
* Pump to draw water from the tank
* Filtration system pump when at home
If you go to pump water to your home, you must install a filtering system to filter the situation in smaller particles, such as sediment, algae roof and heavy metals. Hot water can be useddo for toilet cleaning and laundry, and even if you do not drink the water, you want to protect the water as clean as possible for your clothing, appliances and plumbing.
If nature needs help
Sometimes nature needs a support and the force of gravity alone is not enough to fill water tanks with rain water. This may be due to the position of the country, or where to find the reservoir of rainwater. In these cases you need to add a sump pump in the tankfirst filter and first flush of rainwater tank and the switch. The rainwater will flow out of the gutter in the PVC pipe and through the first filter in the tank sump pump. The filter system is in this case must be able to sediment or other contaminants that the sump pump can remove damage.
Of course the pump itself is also a filter. The sump pump pumps water through a variety of PVC pipe in the tank. At this point the water will be ready to deploy. OnceAlso, if you intend to use the water inside the house, you need a filtering system that things like parasites, bird droppings, roof and all the toxins that the yeast has done to this point, add away.
You can use the system, but you should get professional help. A technician may need valuable information about the size of the pumps, and the types of filtration systems, the best on your particular setup. The materials usedRainwater collection system are not complicated, but there are still some decisions, which must influence the efficiency of the system.
You make a wise decision if you become one of the tanks will be installed in the house. It 'important to recycle natural resources like water, if you care for the land on which you live.
