Not all types of hydroponics system lends itself well to homemade design. For systems that use drip or sprinklers, you need to buy lots of expensive products before they can produce a system to function properly. Usually you end up learning a lot from your first attempt failed, if you choose to build your own drip system or aeroponics system. This is a simple and relatively inexpensive hydroponics system in the house I found. And 'the ebb and flow homemade.
For a homemade hydroponicsEbb and flow system, you will need two cheap plastic containers, air pump aquarium, aquarium water pump, a timer, a series of flood and drain fitting, and a short piece of pipe plastic. If you're not sure what flood and drain connection to go to Google, click on "images" and a quick search for "flood and drain connection."
The first died, the reservoir of nutrients. Choose a color to remain dark to light died out of the nutrient solution ... This will help prevent the growth ofAlgae. The air pump should go a couple of air stones, which is always bubbles in the reservoir of nutrients. The water pump is also here. The water pump must move at least 100 liters / hour at a height of 3 meters. The pump should cost about $ 30.
The other dead goes on top of the reservoir of nutrients and keep the containers of plants. Planters should be with expanded clay pellets or something equal, like the lava rock candy or chips are filled. Somewhere inEnd of the container (in the sense of the plants) you get two 3 / 4 inch holes and install the flood and drain fitting in one, and overflow into the other. Finish it off with a short piece of hose from water pump to flood and drain fitting (which is the shorter of the two).
All you have to do is plug the water pump on the timer, set the timer for your full and discharge cycle, and fill the tank with 10 liters of nutrient solution. FloodYour plant container for a 1 / 2 hour 4 times a day while the lights are on.
If the pump runs to fill the top container with water (but never higher than the overflow). It takes a while 'to really absorb balls of clay to the nutrient solution. When the pump starts, the flow of nutrient solution once again, the lower assembly, so that the roots of plants and balls of clay moistened with nutrient solution.
The flood and drain system is the homemade hydroponics system I usemore frequently. The function of the system is simple. The results are always very good. The system is so easy to put together.
Before you start ... Their is only one part of the puzzle packed inside garden. You must take control of the 'environment to place your garden in this environment and the plants have fallen. You will also have a much better chance of success if the exact requirements of nutrients (and therefore the exact feeding) to learn your plantsat every stage of their development. To supply these needs, you must learn to properly handle sollution nutrients into a reservoir. Learn these things and you are sure to have a hydro-Greenthumb.
For complete information on the different hydroponics systems and learn how to properly manage your nutrient solution, read
http://www/jasons-indoor-guide-to-organic-and-hydroponics=gardening.com/
0 comments:
Post a Comment